G01 Cantilever Translation Gate:
The Cantilever Translation Gate is need not to install embedded tracks, neither be effected by the uneven ground, ice and snow and other pollutants due to theself-supporting structure design. And it is easy to install;
Multiple anti-corrosive processes and high-grade of polyester powder coating technology;
Italy FAAC motor and control system;
Focus on environmental protection, aesthetic design, structural innovation, safety concept and long term life design.
Performance:
Operation Mode:electric or manual;
Integral welding, high structural strength and higher wind resistance performance;
Hot-dip galvanized steel profiles, epoxy and polyester coating to ensure anti-corrosive function;
Colors can be customized according to the request, and to meet individual needs.
Motor:
Double pan oil immersion clutch to ensure maximum anti-squeezing function;
Mechanical components, coil windings are completely oil-immersed for lubrication and heat dissipation;
Built-in electric control board with display programming;
Magnetic induction limit, infrared anti-collision detection.
Product Model | G01-6000 | G01-8000 | G01-10000 | G01-12000 | G01-15000 |
Passage Width (mm)
| ≤6000 | ≤8000 | ≤10000 | ≤12000 | ≤15000 |
Length (mm)
| 8400
| 11200 | 14000 | 16800 | 21600 |
Installation Height (mm)
| 1800 |
|
|
|
|
Bottom Beam Size (mm) | 200*260*5 |
|
|
|
|
Top Beam Size (mm)
| 80*80*25 | 120*120*2.5 |
|
|
|
Picket Size (mm)
| 32*32*1.5 |
|
|
|
|
Post Size (mm)
| 120*120*2.5 | 100*150*4 |
|
|
|
Motor Model
| FAAC844ER | FAAC844R-3ph |
|
|
|
Standard Accessories
| 2 Remote controls, 1 control box , 1 sensor , 1 warning light |